Fresh

Use Docker Hardened Images with Red Hat OpenShift

Back

Learn how to deploy Docker Hardened Images (DHI) on Red Hat OpenShift, configure Security Context Constraints, handle arbitrary user ID assignment, and set file permissions for both runtime and development image variants.

Docker Hardened Images

30 minutes

« Back to all guides

Use Docker Hardened Images with Red Hat OpenShift

Copy as Markdown

Open MarkdownAsk Docs AIClaudeOpen in Claude

Table of contents

Docker Hardened Images (DHI) can be deployed on Red Hat OpenShift Container Platform, but OpenShift’s security model differs from standard Kubernetes in ways that require specific configuration. Because OpenShift runs containers with an arbitrarily assigned user ID rather than the image’s default, you must adjust file ownership and group permissions in your Dockerfiles to ensure writable paths remain accessible.

This guide explains how to deploy Docker Hardened Images in OpenShift environments, covering Security Context Constraints (SCCs), arbitrary user ID assignment, file permission requirements, and best practices for both runtime and development image variants.

How OpenShift security differs from Kubernetes

OpenShift extends Kubernetes with Security Context Constraints (SCCs), which control what actions a pod can perform and what resources it can access. While vanilla Kubernetes uses Pod Security Standards (PSS) for similar purposes, SCCs are more granular and enforced by default.

The key differences that affect DHI deployments:

Arbitrary user IDs. By default, OpenShift runs containers using an arbitrarily assigned user ID (UID) from a range allocated to each project. The default restricted-v2 SCC (introduced in OpenShift 4.11) uses the MustRunAsRange strategy, which overrides the USER directive in the container image with a UID from the project’s allocated range (typically starting higher than 1000000000). This means even though a DHI image specifies a non-root user (UID 65532), OpenShift will run the container as a different, unpredictable UID.

Root group requirement. OpenShift assigns the arbitrary UID to the root group (GID 0). The container process always runs with gid=0(root). Any directories or files that the process needs to write to must be owned by the root group (GID 0) with group read/write permissions. This is documented in the Red Hat guidelines for creating images.

Important
DHI images set file ownership to nonroot:nonroot (65532:65532) by default. Because the OpenShift arbitrary UID is NOT in the nonroot group (65532), it cannot write to those files — even though the pod is admitted by the SCC and the container starts. You must change group ownership to GID 0 for any writable path. This is the most common source of permission errors when deploying DHI on OpenShift.

Capability restrictions. The restricted-v2 SCC drops all Linux capabilities by default and enforces allowPrivilegeEscalation: false, runAsNonRoot: true, and a seccompProfile of type RuntimeDefault. DHI runtime images already satisfy these constraints because they run as a non-root user and don’t require elevated capabilities.

Pull DHI images into OpenShift

Before deploying, create an image pull secret so your OpenShift cluster can authenticate to the DHI registry or your mirrored repository on Docker Hub.

Create an image pull secret

console

oc create secret docker-registry dhi-pull-secret \
    --docker-server=docker.io \
    --docker-username=<your-docker-username> \
    --docker-password=<your-docker-access-token> \
    --docker-email=<your-email>

If you’re pulling directly from dhi.io instead of a mirrored repository, set --docker-server=dhi.io.

Link the secret to a service account

Link the pull secret to the default service account in your project so that all deployments can pull DHI images automatically:

console

oc secrets link default dhi-pull-secret --for=pull

To use the secret with a specific service account instead:

console

oc secrets link <service-account-name> dhi-pull-secret --for=pull

Build OpenShift-compatible images from DHI

DHI runtime images are distroless — they contain no shell, no package manager, and no RUN-capable environment. This means you cannot use RUN commands inthe runtime stage of your Dockerfile. All file permission adjustments for OpenShift must happen in the -dev build stage, and the results must be copied into the runtime stage using COPY --chown.

The core pattern for OpenShift compatibility:

Use a DHI -dev variant as the build stage (it has a shell).
Build your application and set GID 0 ownership in the build stage.
Copy the results into the DHI runtime image using COPY --chown=<UID>:0.

Example: Nginx for OpenShift

dockerfile

# Build stage — has a shell, can run commands
FROM YOUR_ORG/dhi-nginx:1.29-alpine3.23-dev AS build

# Copy custom config and set root group ownership
COPY nginx.conf /tmp/nginx.conf
COPY default.conf /tmp/default.conf

# Prepare writable directories with GID 0
# (Nginx needs to write to cache, logs, and PID file locations)
RUN mkdir -p /tmp/nginx-cache /tmp/nginx-run && \
    chgrp -R 0 /tmp/nginx-cache /tmp/nginx-run && \
    chmod -R g=u /tmp/nginx-cache /tmp/nginx-run

# Runtime stage — distroless, NO shell, NO RUN commands
FROM YOUR_ORG/dhi-nginx:1.29-alpine3.23

COPY --from=build --chown=65532:0 /tmp/nginx.conf /etc/nginx/nginx.conf
COPY --from=build --chown=65532:0 /tmp/default.conf /etc/nginx/conf.d/default.conf
COPY --from=build --chown=65532:0 /tmp/nginx-cache /var/cache/nginx
COPY --from=build --chown=65532:0 /tmp/nginx-run /var/run

Important
Always use --chown=<UID>:0 (user:root-group) when copying files into the runtime stage. This ensures the arbitrary UID that OpenShift assigns can access the files through root group membership. Never use RUN in the runtime stage — distroless DHI images have no shell.

Note
The UID for DHI images varies by image. Most use 65532 (nonroot), but some (like the Node.js image) may use a different UID. Verify with: docker inspect dhi.io/<image>:<tag> --format '{{.Config.User}}'

Deploy to OpenShift:

yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx-dhi
spec:
  replicas: 1
  selector:
    matchLabels:
      app: nginx-dhi
  template:
    metadata:
      labels:
        app: nginx-dhi
    spec:
      containers:
        - name: nginx
          image: YOUR_ORG/dhi-nginx:1.29-alpine3.23
          ports:
            - containerPort: 8080
          securityContext:
            allowPrivilegeEscalation: false
            runAsNonRoot: true
            seccompProfile:
              type: RuntimeDefault
            capabilities:
              drop:
                - ALL
      imagePullSecrets:
        - name: dhi-pull-secret

DHI Nginx listens on port 8080 by default (not 80), which is compatible with the non-root requirement. No SCC changes are needed.

Example: Node.js application for OpenShift

dockerfile

# Build stage — dev variant has shell and npm
FROM YOUR_ORG/dhi-node:24-alpine3.23-dev AS build
WORKDIR /app
COPY package*.json ./
RUN npm ci
COPY . .
RUN npm run build

# Set GID 0 on everything the runtime needs to write
RUN chgrp -R 0 /app/dist /app/node_modules && \
    chmod -R g=u /app/dist /app/node_modules

# Runtime stage — distroless, NO shell
FROM YOUR_ORG/dhi-node:24-alpine3.23
WORKDIR /app
COPY --from=build --chown=65532:0 /app/dist ./dist
COPY --from=build --chown=65532:0 /app/node_modules ./node_modules
CMD ["node", "dist/index.js"]

Deploy:

yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: node-app
spec:
  replicas: 2
  selector:
    matchLabels:
      app: node-app
  template:
    metadata:
      labels:
        app: node-app
    spec:
      containers:
        - name: app
          image: YOUR_ORG/dhi-node-app:latest
          ports:
            - containerPort: 3000
          securityContext:
            allowPrivilegeEscalation: false
            runAsNonRoot: true
            seccompProfile:
              type: RuntimeDefault
            capabilities:
              drop:
                - ALL
      imagePullSecrets:
        - name: dhi-pull-secret

Handle arbitrary user IDs

OpenShift’s restricted-v2 SCC assigns a random UID to the container process. This UID won’t exist in /etc/passwd inside the image, but the container will still run — the process just won’t have a username associated with it.

This can cause issues with applications that:

Look up the current user’s home directory or username
Write to directories owned by a specific UID
Check /etc/passwd for the running user

Add a `passwd` entry for the arbitrary UID

Some applications (notably those using certain Python or Java libraries) require a valid /etc/passwd entry for the running user. You can handle this with a wrapper entrypoint script.

Because this pattern requires a shell, it only works with DHI -dev variants or with a DHI Enterprise customized image that includes a shell. Prepare the image in the build stage:

dockerfile

FROM YOUR_ORG/dhi-python:3.13-alpine3.23-dev AS build
# ... build your application ...

# Make /etc/passwd group-writable so the entrypoint can append to it
RUN chgrp 0 /etc/passwd && chmod g=u /etc/passwd

# Create the entrypoint wrapper
RUN printf '#!/bin/sh\n\
if ! whoami > /dev/null 2>&1; then\n\
  if [ -w /etc/passwd ]; then\n\
    echo "${USER_NAME:-appuser}:x:$(id -u):0:dynamic user:/tmp:/sbin/nologin" >> /etc/passwd\n\
  fi\n\
fi\n\
exec "$@"\n' > /entrypoint.sh && chmod +x /entrypoint.sh

# This pattern requires a -dev variant as runtime (has shell)
FROM YOUR_ORG/dhi-python:3.13-alpine3.23-dev
COPY --from=build --chown=65532:0 /app ./app
COPY --from=build --chown=65532:0 /entrypoint.sh /entrypoint.sh
COPY --from=build --chown=65532:0 /etc/passwd /etc/passwd
USER 65532
ENTRYPOINT ["/entrypoint.sh"]
CMD ["python", "app/main.py"]

Note
For distroless runtime images (no shell), the passwd-injection pattern is not possible. Instead, use the nonroot SCC (described in the following section) to run with the image’s built-in UID so the existing /etc/passwd entry matches the running process. Alternatively, OpenShift 4.x automatically injects the arbitrary UID into /etc/passwd in most cases, which resolves this for many applications.

Use the non-root SCC for fixed UIDs

If your application requires running as the specific UID defined in the image (typically 65532 for DHI), you can use the nonroot SCC instead of the default restricted-v2. The nonroot SCC uses the MustRunAsNonRoot strategy, which allows any non-zero UID.

Important
For the nonroot SCC to work, the image’s USER directive must specify a numeric UID (for example, 65532), not a username string like nonroot. OpenShift cannot verify that a username maps to a non-zero UID. Verify your DHI image with: docker inspect YOUR_ORG/dhi-node:24-alpine3.23 --format '{{.Config.User}}' If the output is a string rather than a number, set runAsUser explicitly in the pod spec.

Create a service account and grant it the nonroot SCC:

console

oc create serviceaccount dhi-nonroot
oc adm policy add-scc-to-user nonroot -z dhi-nonroot

Reference the service account in your deployment:

yaml

spec:
  template:
    spec:
      serviceAccountName: dhi-nonroot
      containers:
        - name: app
          image: YOUR_ORG/dhi-node:24-alpine3.23
          securityContext:
            runAsUser: 65532
            runAsNonRoot: true
            allowPrivilegeEscalation: false
            seccompProfile:
              type: RuntimeDefault
            capabilities:
              drop:
                - ALL

Verify the SCC assignment after deployment:

console

oc get pod <pod-name> -o jsonpath='{.metadata.annotations.openshift\.io/scc}'

This should return nonroot.

When using the nonroot SCC with a fixed UID, the process runs as 65532 (matching the image’s file ownership), so the GID 0 adjustments are not strictly required for paths already owned by 65532. However, applying chown <UID>:0 is still recommended for portability across both restricted-v2 and nonroot SCCs.

Use DHI dev variants in OpenShift

DHI -dev variants include a shell, package manager, and development tools. They run as root (UID 0) by default, which conflicts with OpenShift’s restricted-v2 SCC. There are three approaches:

Option 1: Use dev variants only in build stages (recommended)

Use -dev variants only in Dockerfile build stages and never deploy them directly to OpenShift:

dockerfile

FROM YOUR_ORG/dhi-node:24-alpine3.23-dev AS build
WORKDIR /app
COPY package*.json ./
RUN npm ci
COPY . .
RUN npm run build

# Set root group ownership for OpenShift compatibility
RUN chgrp -R 0 /app/dist /app/node_modules && \
    chmod -R g=u /app/dist /app/node_modules

FROM YOUR_ORG/dhi-node:24-alpine3.23
WORKDIR /app
COPY --from=build --chown=65532:0 /app/dist ./dist
COPY --from=build --chown=65532:0 /app/node_modules ./node_modules
CMD ["node", "dist/index.js"]

The final runtime image is non-root and distroless, fully compatible with restricted-v2.

Option 2: Grant the `anyuid` SCC for debugging

If you need to run a -dev variant directly in OpenShift for debugging, grant the anyuid SCC to a dedicated service account:

console

oc create serviceaccount dhi-debug
oc adm policy add-scc-to-user anyuid -z dhi-debug

Then reference it in your pod:

yaml

apiVersion: v1
kind: Pod
metadata:
  name: dhi-debug
spec:
  serviceAccountName: dhi-debug
  containers:
    - name: debug
      image: YOUR_ORG/dhi-node:24-alpine3.23-dev
      command: ["sleep", "infinity"]
  imagePullSecrets:
    - name: dhi-pull-secret

Important
The anyuid SCC allows running as any UID including root. Only use this for temporary debugging — never in production workloads.

Option 3: Use `oc debug` or ephemeral containers

For distroless runtime images with no shell, use OpenShift-native debugging tools instead of docker debug (which only works with Docker Engine, not with CRI-O on OpenShift).

Use oc debug to create a copy of a pod with a debug shell:

console

# Create a debug pod based on a deployment
oc debug deployment/nginx-dhi

# Override the image to use a -dev variant with a shell
oc debug deployment/nginx-dhi --image=YOUR_ORG/dhi-node:24-alpine3.23-dev

Use ephemeral containers (OpenShift 4.12+ / Kubernetes 1.25+):

console

kubectl debug -it <pod-name> --image=YOUR_ORG/dhi-node:24-alpine3.23-dev \
    --target=app -- sh

This attaches a temporary debug container to a running pod without restarting it, sharing the pod’s process namespace.

Note
docker debug is a Docker Desktop/CLI feature for local development. It is not available on OpenShift clusters, which use CRI-O as their container runtime.

Deploy DHI Helm charts on OpenShift

DHI provides pre-configured Helm charts for popular applications. When deploying these charts on OpenShift, you may need to adjust security context settings.

Inspect chart values first

Before installing, check what security context values the chart exposes:

console

helm registry login dhi.io

helm show values oci://dhi.io/<chart-name> --version <version> | grep -A 20 securityContext

The available value paths vary by chart, so always check values.yaml before setting overrides.

Install with OpenShift overrides

The following example shows a typical installation pattern. Adjust the --set paths based on what helm show values returns for your specific chart:

console

helm install my-release oci://dhi.io/<chart-name> \
    --version <version> \
    --set "imagePullSecrets[0].name=dhi-pull-secret" \
    -f openshift-values.yaml

Create an openshift-values.yaml with security context overrides appropriate for your chart:

yaml

# Example — adjust keys based on `helm show values` output
podSecurityContext:
  runAsNonRoot: true
  seccompProfile:
    type: RuntimeDefault

securityContext:
  allowPrivilegeEscalation: false
  capabilities:
    drop:
      - ALL

Note
DHI Helm chart value paths are not standardized across charts. For example, one chart may use image.imagePullSecrets, while another uses global.imagePullSecrets. Always consult the specific chart’s documentation or values.yaml.

Verify your deployment

After deploying a DHI image to OpenShift, verify the security configuration.

Check the assigned SCC

console

oc get pods -o 'custom-columns=NAME:.metadata.name,SCC:.metadata.annotations.openshift\.io/scc'

Runtime DHI images should show restricted-v2 (or nonroot if you configured it).

Check the running UID

console

oc exec <pod-name> -- id

With the restricted-v2 SCC, you should see output like:

text

uid=1000650000 gid=0(root) groups=0(root),1000650000

The UID is from the project’s allocated range, and the primary GID is always 0 (root group). With the nonroot SCC and runAsUser: 65532, you would see uid=65532.

Confirm the image is distroless

console

oc exec <pod-name> -- sh -c "echo hello"

For runtime (non-dev) DHI images, this command should fail with an error indicating that sh was not found in $PATH. The exact error format varies between CRI-O versions.

Scan the deployed image

Use Docker Scout to verify the security posture of the deployed image (run this from your local machine, not on the cluster):

console

docker scout cves YOUR_ORG/dhi-nginx:1.29-alpine3.23
docker scout quickview YOUR_ORG/dhi-nginx:1.29-alpine3.23

Common issues and solutions

Pod fails to start with “container has runAsNonRoot and image has group oruser ID set to root.” This happens when deploying a DHI -dev variant with the default restricted-v2 SCC. Either use the runtime variant instead, or grant the anyuid SCC to the service account.

Application cannot write to a directory. The arbitrary UID assigned by OpenShift doesn’t have write permissions. This is the most common issue with DHI on OpenShift. All writable paths must be owned by GID 0 with group write permissions. Fix this in the build stage: chgrp -R 0 /path && chmod -R g=u /path, then COPY --chown=<UID>:0 into the runtime stage.

Application fails with “user not found” or “no matching entries in passwdfile.” Some applications require a valid /etc/passwd entry. OpenShift 4.x automatically injects the arbitrary UID into /etc/passwd in most cases. If your application still fails, use the passwd-injection pattern (requires a -dev variant) or use the nonroot SCC to run with the image’s built-in UID.

Pod fails to bind to port 80 or 443. Ports lower than 1024 require root privileges. DHI images use unprivileged ports by default (for example, Nginx uses 8080). Configure your OpenShift Service to map the external port to the container’s unprivileged port:

yaml

apiVersion: v1
kind: Service
metadata:
  name: nginx-dhi
spec:
  ports:
    - port: 80
      targetPort: 8080
  selector:
    app: nginx-dhi

ImagePullBackOff with “unauthorized: authentication required.” Verify the pull secret is correctly configured and linked to the service account. Check with oc get secret dhi-pull-secret and oc describe sa default.

Dockerfile build fails with “exec: not found” in runtime stage. You are using RUN in a distroless runtime stage. DHI runtime images have no shell, so RUN commands cannot execute. Move all RUN commands to the -dev build stage and use COPY --chown to transfer results.

DHI and OpenShift compatibility summary

Feature	DHI runtime	DHI `-dev`	DHI with Enterprise customization
Default SCC (`restricted-v2`)	Yes, with GID 0 permissions	Requires `anyuid`	Yes, with GID 0 permissions
Non-root by default	Yes (UID 65532)	No (root)	Yes (configurable UID)
Arbitrary UID support	Yes, with `chown <UID>:0`	Yes	Yes, with `chown <UID>:0`
Distroless (no shell)	Yes — no `RUN` in Dockerfile	No	Yes — no `RUN` in Dockerfile
Unprivileged ports	Yes (higher than 1024)	Configurable	Yes (higher than 1024)
SLSA Build Level 3	Yes	Yes	Yes
Debug on cluster	`oc debug` / ephemeral containers	`oc exec` with shell	`oc debug` / ephemeral containers

What’s next

Use an image in Kubernetes — general DHI Kubernetes deployment guide.
Customize an image — add packages to DHI images using Enterprise customization.
Debug a container — troubleshoot distroless containers with Docker Debug (local development).
Managing SCCs — Red Hat’s reference documentation on Security Context Constraints.
Creating images for OpenShift — Red Hat’s guidelines for building OpenShift-compatible container images.

Use Docker Hardened Images with Red Hat OpenShift ​

Use Docker Hardened Images with Red Hat OpenShift ​

Use Docker Hardened Images with Red Hat OpenShift

Use Docker Hardened Images with Red Hat OpenShift